Description The DIGITAL STANDARD V2 locomotive decoder is suitable for all DC locomotives with continuous current draw of 1.0 Amp or less with a peak of 1.8 Amp. The characteristics of the decoder are: Super smooth and silent high frequency back-emf motor control. Shunting Speed on F3. Selectable for operation with 14/27, or 28/128 speed steps. It can operate on DC layouts, but you can disable this function. The system protects the motor and function outputs from short circuit. Four function outputs rated at 150mA each with advanced function mapping. Function outputs can be set to a timer for electronic uncoupling. Directional or independent lighting with dimming and special effects. Support for Multiple traction and long addresses (Loco addresses up to 9,999). Support for programming on the mainline (POM). Support for all forms of programming as described in NMRA RP-9.2.3. The new STANDARD V2 is not only RailCom capable, but also masters the practical ABC technology. The outstanding feature of all Digital plus decoders is the exclusive ABC technology, which enables simple, precise stopping before signals. Current Rating – Continuous 1 Amp, peak 1.8 Amps Connector – NEM 652 (8 pin) Size – 25 x 15 x 3.8 (mm) Functions – 4 functions with 0.15 Amp each (total load capacity of all 4 outputs: 350 mA)
